Motor, Resistance
|
|
|
Resistance motor.
NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The center phillips screw in the cam can be loosened to adjust the cam position. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 2 | Frame, Upright | 1 | 3 | Console Plate | 1 | 4 | HB,2 BEND,2 HAND,AGRYT 192995B | 1 | 5 | HB,3 BEND,LT,W/FOAM,ARPS | 1 | 6 | NLA Arm, Upper, Right | 1 | 7 | Bracket, BOOK RACK,ALMBR 193251A | 1 | 8 | Console, Display | 1 | 9 | Cover, Crank | 2 | 10 | SDSHLD,LT,DKNGY | 1 | 11 | SDSHLD,RT,DKNGY 192456B | 1 | 12 | FOAM,PAD,1.37X1.67X11.5192951D | 2 | 13 | Bracket, Cup Holder | 1 | 14 | PULSE,GRIP,Assembly 193124A | 1 | 15 | NLA Wire Harness | 1 | 16 | NLA Bushing, Plastic | 2 | 17 | NLA Cover, Handlebar | 2 | 18 | Bushing, 5/8" ID | 6 | 19 | NLA Cover, Handle Bar Tube | 2 | 20 | Bushing, Plastic | 2 | 21 | NLA Axle | 1 | 22 | Endcap, Round, Internal | 2 | 23 | NLA Bushing | 4 | 24 | Frame, Stabilizer | 1 | 25 | Endcap | 4 | 26 | Foot, Leveler | 4 | 27 | Wheel | 2 | 28 | Leg, Pedal, Left | 1 | 30 | Endcap, Rectanglar, Internal | 4 | 31 | End Cap, Rectangle, Internal | 2 | 32 | LEG,PEDAL,TOP,RT,AGRYT 193789B | 1 | 33 | LEG,PEDAL,TOP,LT,AGRYT 192042B | 1 | 34 | PEDAL,RT,DKNGY 192393C | 1 | 35 | PEDAL,LT,DKNGY 192392C | 1 | 36 | NLA Bracket, Idler | 1 | 37 | BOLT,J,M8-1.25X41.4MM 192994- | 1 | 38 | Endcap, Internal, Rectangle | 2 | 39 | WIRE,Harness,65.0 192403- | 1 | 40 | Crank arm | 2 | 41 | NLA Pulley, w/ Axle | 1 | 42 | Spacer | 1 | 43 | Bearing, Sealed | 2 | 44 | NLA Spacer, Plastic | 1 | 45 | NLA Power Board | 1 | 46 | NLA Generator | 1 | 47 | Motor, Resistance | 1 | 48 | Cable, Resistance | 1 | 49 | NLA Flywheel | 1 | 50 | Magnet | 1 | 51 | Bearing, Sealed | 2 | 52 | NLA Axle | 1 | 53 | Bracket, MECH,C-MAGNET 192382A | 1 | 54 | Bracket, MAG PIVOT,AGRYT 192381B | 1 | 55 | EYEBOLT | 2 | 56 | Bracket | 2 | 57 | Belt, Drive | 1 | 58 | Bracket, L,RSW,.634X1.25" 193125A | 1 | 59 | Retainer Clamp | 1 | 60 | Speed sensor | 1 | 61 | Axle | 1 | 62 | Bumper | 2 | 63 | STBLZR,Weldment,AGRYT 193052A | 1 | 64 | Screw | 1 | 65 | Washer, Plastic | 4 | 66 | Standoff | 4 | 67 | Screw | 2 | 68 | Screw | 2 | 69 | Screw | 3 | 70 | Washer, Flat | 2 | 71 | Washer, Flat | 5 | 72 | Washer, Lock | 2 | 73 | Screw | 12 | 74 | Bracket, PEDAL CUSHION,ARPS | 2 | 75 | Screw | 4 | 77 | SPRNG,EXTNSN,4.75X.63"H00054ZB | 1 | 78 | Screw | 4 | 79 | Screw | 2 | 80 | Nut, Nylock Hex | 2 | 81 | Bolt | 4 | 82 | Screw | 24 | 83 | Hex Nut | 3 | 84 | Nut, Nylock Hex | 4 | 85 | Nut, Locking | 7 | 86 | Hex Nut | 3 | 88 | LEG,PEDAL,ARPS,RT,W/BushingS | 1 | 89 | Washer | 4 | 90 | Nylock Hex Nut | 4 | 91 | Screw | 1 | 92 | Screw | 2 | 93 | Screw | 2 | 94 | Screw | 1 | 95 | Screw | 4 | 96 | Screw | 2 | 97 | Screw | 2 | 98 | Bracket, L,MAG SPRING | 1 | 99 | NLA Bracket, CARRIAGE,BTTM,ASSY | 2 | 100 | Selector, Rail | 2 | 101 | Washer, Spring | 2 | 102 | Screw | 2 | 103 | Washer, Locking | 4 | | Tool, Allen wrench | 2 | | Plug, RCA | 1 | | Grease | 1 | | Tool, Belt Adjustment | 1 | | Tool, Wrench | 1 | | Strap, Heartrate | 1 | | NLA Monitor, Chest, Heart Rate | 1 | | Wire Harness, Audio | 1 | | Heart Rate Monitor, Kit | 1 | | Splitter, ECA | 1 | | CD, I-Fit, Rock, Level 1 | 1 | | NLA CD, I-Fit, Rock, Level 2 | 1 | | CD, I-Fit, Rock, Level 3 | 1 | | CD, I-Fit, World beat, Level 1 | 1 | | NLA CD, I-Fit, World beat, Level 2 | 1 | | CD, I-Fit, World beat, Level 3 | 1 | | Video, VHS, Coast to Coast, Level 2 | 1 | | VHS,EL,I-FIT,HAWAII,LVL 1 | 1 | | Wire, Jumper | 1 | | DECAL,WRNG,NOFRWHL UNIT209489A | 1 | | Decal, Lable | 1 | | Accessory kit | 1 | |
|
