Motor, Incline
|
Incline actuator motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM Qty | 1 | Screw | 8 | 2 | Screw | 4 | 3 | Tool, Belt Adjustment | 1 | 4 | Screw | 4 | 5 | Screw | 2 | 6 | Screw | 4 | 7 | Screw | 4 | 8 | Nut | 6 | 9 | Washer, Locking | 8 | 11 | Screw, Self Drilling | 9 | 12 | Screw | 24 | 13 | Spacer | 2 | 15 | Screw | 1 | 16 | Screw | 2 | 17 | Screw | 2 | 18 | SCREW,PHFHMS,BPO,M8-1.25X60 | 2 | 19 | Screw | 2 | 20 | Screw | 1 | 21 | Screw | 1 | 22 | Screw | 1 | 23 | Screw | 2 | 24 | Screw | 10 | 25 | Screw | 10 | 26 | Screw | 2 | 27 | Washer, Locking | 2 | 28 | Switch, On/Off | 1 | 29 | Screw | 4 | 30 | Washer | 2 | 31 | Washer, Lock | 2 | 32 | Transformer | 1 | 33 | HB,1 BEND,LT,EBYTX | 1 | 34 | HB,1 BEND,RT,EBYTX | 1 | 35 | Wire Harness | 1 | 36 | Nut | 2 | 37 | Tinnerman Clip | 3 | 38 | Wire harness | 1 | 39 | Wire, Jumper | 1 | 40 | Screw | 4 | 41 | RAIL,DECK,LT,ARPS | 1 | 42 | Decal,Warning | 1 | 43 | Spring, Deck | 2 | 44 | Deck | 1 | 45 | Treadbelt | 1 | 46 | Belt guide | 2 | 47 | CVR,UPRT,UPPER,LT,EBONY | 1 | 48 | Spacer, Frame | 2 | 49 | SPCR,PLSTC,.70X1.0X.165 | 2 | 50 | Magnet | 1 | 51 | Roller, Front | 1 | 52 | Clamp, Cable, Long | 2 | 53 | NLA Latch, Storage | 1 | 55 | RAIL,DECK,RT,ARPS | 1 | 57 | NLA Bracket, Roller, Rear | 2 | 58 | Roller, Rear | 1 | 59 | Foot, Rear | 2 | 60 | CVR,UPRT,UPPER,RT,EBONY | 1 | 61 | NLA Cover, Motor | 1 | 62 | Belt, Drive | 1 | 63 | DECAL,CUSHION,AIRTECH | 2 | 64 | Motor, Drive | 1 | 65 | FRAME,LIFT,PYSVT,ARPS | 1 | 66 | Wire tie | 3 | 67 | WIRE,JMPR,008",GRN,F/R 190907B | 1 | 68 | Power Cord | 1 | 69 | Grommet, Strain Relief | 1 | 70 | Controller, MC2100WA, Refurbished | 1 | 71 | Sensor, Speed | 1 | 72 | Retainer Clamp | 1 | 73 | Cover, Lower, Front | 1 | 74 | UPRT,LT,PYSVT | 1 | 75 | Motor, Incline | 1 | 76 | Spacer, Left | 1 | 77 | Endcap, Base | 2 | 78 | RIGHT UPRIGHT | 1 | 79 | Spacer, Upright, Right | 1 | 80 | Spacer | 4 | 81 | Bumper, Leveler | 4 | 82 | Decal, Caution, English | 2 | 83 | UPRT,BASE,ARPS | 1 | 84 | Wheel, Transport | 2 | 85 | Wire Tie | 2 | 86 | Cable Tie | 11 | 87 | Door, Access | 1 | 88 | Screw | 6 | 90 | NLA Cup holder, Left | 1 | 91 | Cup Holder, Right | 1 | 92 | Cable Tie, Mounting | 2 | 93 | Housing, Console | 1 | 94 | Clamp, Console, Rubber | 4 | 95 | Bar, HR, Bottom | 1 | 97 | ENDCAP,HB,L/R,EBONY | 2 | 98 | Endcap, Lower Handlebar | 2 | 100 | Safety Key | 1 | 101 | Wire, Ground | 1 | 102 | NLA Adapter, I-POD, Kit | 1 | 103 | Wire Harness, Filter | 1 | 104 | Spacer | 1 | 105 | Screw | 2 | 106 | Clip | 1 | 107 | Wire harness | 1 | 108 | Screw | 2 | 109 | Screw | 1 | 110 | Washer, Star | 1 | 111 | Bracket, Motor | 1 | 112 | Nut, Motor | 2 | 113 | Nut, Nylock | 3 | 114 | PULSE PLATE KIT | 1 | | WIRE,JMPR,006",BLU,F/F 109407E | 1 | | 10 inch RED WIRE - M/F | 1 | | WIRE,JMPR,010",BLU,M/F 114011D | 1 | | Wire, Blue | 1 | | Wire, M/F, 8" | 1 | | Fuse, Slo-blow | 1 | | TECH SHEET | 1 | | Envelope | 1 | | OM,RBTL647081 | 1 | | LITPAC NOTE: | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | Accessory Kit | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | | NLA Heart Rate monitor, kit | 1 | |
|