Motor, Incline
|
Incline actuator motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM Qty | 1 | Screw | 19 | 2 | M4 X 25MM SCREW | 4 | 3 | Screw | 2 | 4 | Screw | 2 | 5 | Screw | 4 | 6 | Screw | 4 | 7 | Washer, Star | 1 | 8 | Washer, Locking | 4 | 9 | Nut | 2 | 10 | Washer | 4 | 11 | Screw | 5 | 12 | Screw | 2 | 12A | Screw | 13 | 12B | Screw | 2 | 13 | Screw | 3 | 14 | M8 X 35MM SCREW | 2 | 15 | Screw | 2 | 16 | Screw | 2 | 17 | Screw | 2 | 18 | Screw | 1 | 19 | Screw | 1 | 20 | Screw | 2 | 21 | Screw | 1 | 22 | Screw | 7 | 23 | Screw | 8 | 24 | Screw | 2 | 25 | Screw | 2 | 26 | Screw | 1 | 27 | Screw | 1 | 28 | Screw | 4 | 29 | Washer | 2 | 30 | Washer | 2 | 31 | Nut, Nylock | 3 | 32 | Nut, Motor | 2 | 33 | Nut, Locking | 4 | 34 | Wrench, Allen | 1 | 35 | ISLATR,PMS647,ARPS | 2 | 36 | Nut | 2 | 37 | Tinnerman Clip | 3 | 38 | CAGE NUT | 4 | 39 | LEFT FOOT RAIL | 1 | 40 | Wire Harness | 1 | 41 | Guide, Belt | 2 | 42 | Magnet | 1 | 43 | Belt, Drive | 1 | 44 | Roller, Front | 1 | 45 | Treadbelt | 1 | 46 | BRD,WLK,ARPS,W/RI&DECAL | 1 | 47 | RIGHT FOOT RAIL | 1 | 49 | Decal,Warning | 1 | 50 | Spacer | 2 | 51 | FOOT,REAR,LT,URBGY | 1 | 52 | FOOT,REAR,RT,URBGY | 1 | 53 | HOOD,FRONT,ARPS | 1 | 54 | RPM sensor | 1 | 55 | Retainer Clamp | 1 | 56 | Wheel | 2 | 57 | Wire, Jumper, Black | 1 | 58 | Motor, Incline | 1 | 59 | NLA Bracket, Rear | 2 | 60 | NLA Motor, Drive | 1 | 61 | Bracket, Motor | 1 | 62 | Wire tie | 3 | 63 | Frame, Lift | 1 | 64 | Hex Nut | 2 | 65 | Power Cord | 1 | 66 | Controller | 1 | 67 | Grommet, Strain Relief | 1 | 68 | Switch, On/Off | 1 | 69 | BLYPN,MOLDED,URBGY | 1 | 70 | Washer, Star | 2 | 71 | NLA BKT,LATCH,URBGY | 1 | 72 | Pin, Latch | 1 | 73 | UPRT,LT,ARPS | 1 | 74 | Plate, Pulse, Bottom, Left, Chrome | 1 | 75 | Wire Harness | 1 | 76 | Screw | 2 | 77 | NLA Wire harness, Upright, 75" | 1 | 78 | UPRT,RT,ARPS | 1 | 79 | Spacer | 4 | 80 | SPCR,UPRT,RT,URBGY | 1 | 81 | Bumper, Leveler | 4 | 82 | End Cap, Base | 2 | 83 | NLA SPCR,UPRT,LT,URBGY | 1 | 84 | Decal, Caution, English | 2 | 85 | UPRT,BASE,ARPS | 1 | 86 | Wheel | 2 | 87 | Console, Display | 1 | 88 | CONSOLE BASE | 1 | 89 | HB,1 BEND,LT,URBGY | 1 | 90 | HB,1 BEND,RT,URBGY | 1 | 91 | ENDCAP,HB,L/R,URBGY | 2 | 92 | Cable Tie, Mounting | 2 | 93 | Safety key | 1 | 94 | Wire Tie | 2 | 95 | Cable Tie | 10 | 96 | Plate, Pulse, Top, left, Chrome | 1 | 97 | Door, Access | 1 | 98 | Clamp, Cable, Long | 1 | 99 | Spacer | 1 | 100 | Roller, Rear | 1 | 101 | Screw | 4 | 102 | Wire, Jumper | 1 | 103 | FRAME CAP | 2 | 104 | Spacer | 2 | 105 | Tool, Wrench | 1 | 106 | Tool, Belt Adjustment | 1 | 107 | Clamp, Console, Rubber | 4 | 108 | Wire, Green | 1 | 109 | PULSE SUPPORT | 1 | 110 | LEFT ACCESSORY TRAY | 1 | 111 | RIGHT ACCESSORY TRAY | 1 | 112 | ENDCAP,HB,L/R,URBGY | 2 | 113 | Plate, Pulse, Bottom, Right, Chrome | 1 | 114 | PULSE PLATE KIT | 1 | 115 | Clip | 1 | | Envelope | 1 | | Wire, Jumper, Blue | 1 | | Wire, Jumper, 6", Red | 1 | | Wire Harness, Jumper, Blue 6" | 1 | | Decal, Caution | 1 | | WIRE,JMPR,006",Black,M/F 114011D | 1 | | Accessory Kit, Canada | 1 | | Kit, Lube | 1 | | NLA Heart Rate monitor, kit | 1 | | Lubricant, Treadbelt | 1 | | Accessory Kit | 1 | | Hardware Kit | 1 | | Decal, Warning, Surge, French | 1 | | LIT PACK NOTE: | 1 | | Decal, Warning, Static, IFIT | 1 | | Power Cord | 1 | | NLA Adapter, I-POD, Kit | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | LITPAC,RBTL69908-CWL | 1 | |
|