Motor, Incline
|
Lift motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM Qty | 1 | Screw | 19 | 2 | M4 X 25MM SCREW | 4 | 3 | Screw | 2 | 4 | Screw | 2 | 5 | Screw | 4 | 6 | Screw | 4 | 7 | Washer, Star | 1 | 8 | Washer, Locking | 4 | 9 | Nut | 2 | 10 | Washer | 4 | 11 | Screw | 5 | 12 | Screw | 2 | 12A | Screw | 13 | 12B | Screw | 2 | 13 | Screw | 3 | 14 | M8 X 35MM SCREW | 2 | 15 | Screw | 2 | 16 | Screw | 2 | 17 | Screw | 2 | 18 | Screw | 1 | 19 | Screw | 1 | 20 | Screw | 2 | 21 | Screw | 1 | 22 | Screw | 7 | 23 | Screw | 8 | 24 | Screw | 2 | 25 | Screw | 2 | 26 | Screw | 1 | 27 | Screw | 1 | 28 | Screw | 4 | 29 | Washer | 2 | 30 | Washer | 2 | 31 | Nut, Nylock | 3 | 32 | Nut, Motor | 2 | 33 | Nut, Locking | 4 | 34 | Wrench, Allen | 1 | 35 | PLATFORM CUSHION | 2 | 36 | Nut | 2 | 37 | Tinnerman Clip | 3 | 38 | CAGE NUT | 4 | 39 | NLA Rail, Deck, Left | 1 | 40 | Wire Harness | 1 | 41 | Guide, Belt | 2 | 42 | Magnet | 1 | 43 | Belt, Drive | 1 | 44 | DRIVE ROLLER/PULLEY | 1 | 45 | Treadbelt | 1 | 46 | WALKING PLATFORM | 1 | 47 | NLA Rail, Foot, Right | 1 | 49 | Decal, Warning | 1 | 50 | Spacer | 2 | 51 | NLA Foot, Left | 1 | 52 | NLA Foot, Rear, Right | 1 | 53 | Cover, Motor | 1 | 54 | RPM sensor | 1 | 55 | Retainer Clamp | 1 | 56 | Wheel | 2 | 57 | Wire, Jumper, Black | 1 | 58 | Motor, Incline | 1 | 59 | IDLER ROLLER BRACKET | 2 | 60 | NLA Motor, Drive | 1 | 61 | Bracket, Motor | 1 | 62 | Wire tie | 3 | 63 | Frame, Lift | 1 | 64 | Hex Nut | 2 | 65 | Power Cord | 1 | 66 | CNTRLR,MC2100LTS-30,ARPS,INTL | 1 | 67 | Grommet, Strain Relief | 1 | 68 | Switch, On/Off | 1 | 69 | Cover, Motor, Lower | 1 | 70 | Washer, Star | 2 | 71 | Bracket, Latch | 1 | 72 | Pin, Latch | 1 | 73 | LEFT UPRIGHT | 1 | 74 | Plate, Pulse, Bottom, Left, Chrome | 1 | 75 | Wire Harness | 1 | 76 | Screw | 2 | 77 | Wire Harness | 1 | 78 | RIGHT UPRIGHT | 1 | 79 | Spacer | 4 | 80 | Spacer, Upright, Right | 1 | 81 | Bumper, Leveler | 4 | 82 | Endcap, Base | 2 | 83 | LEFT UPRIGHT SPACER | 1 | 84 | Decal, Warning | 2 | 85 | UPRT,BASE,ARPS,INTL | 1 | 86 | Wheel | 2 | 87 | Console, Display | 1 | 88 | CNSL,BASE,GIAMBI 30,EBONY | 1 | 89 | Handlebar, Left | 1 | 90 | HB,1 BEND,RT,ARPS | 1 | 91 | Endcap | 2 | 92 | Cable Tie, Mounting | 2 | 93 | Safety Key | 1 | 94 | Wire Tie | 2 | 95 | Cable Tie | 10 | 96 | Plate, Pulse, Top, left, Chrome | 1 | 97 | Door, Access | 1 | 98 | Clamp, Cable, Long | 1 | 99 | Spacer | 1 | 100 | RLR,IDLER,1.6 | 1 | 101 | Screw | 4 | 102 | Wire, Jumper | 1 | 103 | End Cap, Rectangle, Internal | 2 | 104 | Spacer | 2 | 105 | Tool, Wrench | 1 | 106 | Tool, Belt Adjustment | 1 | 107 | Clamp, Console, Rubber | 4 | 108 | Wire, Green | 1 | 109 | PULSE SUPPORT | 1 | 110 | CNSL,CUPHOLDER,LT | 1 | 111 | CNSL,CUPHOLDER,RT | 1 | 112 | Endcap, Handrail | 2 | 113 | Plate, Pulse, Bottom, Right, Chrome | 1 | 114 | PULSE PLATE KIT | 1 | 115 | Clip | 1 | | Wire harness, 20" | 1 | | NLA Heart Rate monitor, kit | 2 | | PLATE,INCLN,1.19X1.05" 162344C | 1 | | Envelope | 1 | | Wire, Jumper, Blue | 1 | | Wire, Jumper, 6", Red | 1 | | Wire Harness, Jumper, Blue 6" | 1 | | WIRE,JMPR,006",Black,M/F 114011D | 1 | | Kit, Lube | 1 | | Lubricant, Treadbelt | 1 | | Decal, Warning, Surge, French | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | DECAL,WARN,SURGE | 1 | | Manual, Owners | 1 | |
|